Best 3D Printed Fidget Spinners

Best 3d printed Fidget Spinner projects. you can able to download and print via Fidget spinner 3d files

  1. Visit Website

    Needed:

    Your email address will not be published.Required fields are marked *

  2. Visit Website

    This is a really cool 6 sided nut fidget spinner. This looks amazing in the render, hope it prints well! Enjoy!


    Your email address will not be published.Required fields are marked *

  3. Visit Website

    The design features four designed in bearings. With a well sliced file printed on an accurate / precise machine the bearings should be free or take very little effort to break free straight off the build plate. As soon as the bearings have been freed add a small amount of lubricant to the moving bearing surfaces (refer images) and you're in business... ready to give your 'Fidget Spinner' a good spin. Is it as good as a spinner with metal bearings... probably not but they should still spin very well and are definitely fun to fidget with!

    Your email address will not be published.Required fields are marked *

  4. Visit Website

    The design features four designed in bearings. With a well sliced file printed on an accurate / precise machine the bearings should be free or take very little effort to break free straight off the build plate. As soon as the bearings have been freed add a small amount of lubricant to the moving bearing surfaces (refer images) and you're in business... ready to give your 'Fidget Spinner' a good spin. Is it as good as a spinner with metal bearings... probably not but they should still spin very well and are definitely fun to fidget with!

    Your email address will not be published.Required fields are marked *

  5. Visit Website

    This is a fidget spinner I made for people with smaller hands, or kids. It is also a great first spinner to help get used to the flicking motion with your fingers. The fitting of the bearings might be a hair tight, but do not worry, I assure you they fit. If anything, use some WD-40 to oil up the holes to ease popping them into place. Just remember, the easier they go in, the easier they fly out, so do not go to crazy.

    Your email address will not be published.Required fields are marked *

  6. Visit Website

    Do you always forget your fidget spinner at home?? Print a Fidget Spinner Keychain to solve that problem and keep your fidgeting toy with you at all times. This keychain may not fit your spinner as I have designed it to fit a spinner body specific to my design. The inside diameter of the keychain is 25mm

    Your email address will not be published.Required fields are marked *

  7. Visit Website

    This is a "bearing" for fidget spinners. It was modeled to be the same size as the 608 bearings commonly used in fidget spinners. The center hole is 8mm, so you should still be able to use thumb pads. The outer diameter is 22mm and therefore should pop into any spinner you might want to put it in. Finally the "bearing" is 7mm tall.

    There are 3 different versions. A loose version (called "bearing"), a tighter version ("bearing-tighter"), and a version with 4 cutouts ("bearing-slots").

    There is always room for improvement.

    Video:
    https://youtu.be/UMClVU6S02A

    Your email address will not be published.Required fields are marked *

  8. Visit Website
    • Printer: Monoprice Maker Select v2
    • Rafts: No
    • Supports: No
    • Resolution: 0.2
    • Infill: 100

    Notes:

    • used ABS
    • 245 print head, 105 bed temps
    • pause the print at about 65% complete and drop in the nickles
    • use 2 nickles per coin hole
    • make sure you have the sides showing that you want
    • CAUTION - the nickles hold the heat from the heated bed a lot longer than the plastic
    Your email address will not be published.Required fields are marked *

  9. Visit Website

    This fidget spinner will have you addicted for hours. Requires 4 608 Bearings. The caps are included with the spinner STL file as long as you download them all together.

    Your email address will not be published.Required fields are marked *

  10. Visit Website

    This is a fancy fidget spinner I designed in Fusion 360. Enjoy!


    Your email address will not be published.Required fields are marked *

Add Your Content
Or
Paste a YouTube, Instagram or SoundCloud link (not embed code).

, , ,

No comments yet.

Leave a Reply

Choose A Format
Open List
Open List

Add A Knowledge Base Question !

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?