Waht is the solution for ZYYX+ 3d Printer Your build plate needs calibration. Please run the leveling script. Error
If this message is displayed the first thing to check is that the build plate is securely placed in the build plate holder.
The build plate holder has grooves that should be matched with the magnets under the build plate. Make sure the magnets are positioned firmly in the grooves and restart print to solve this error message.
If the message still appears you need to redo the factory calibration of the build plate.
Calibrate the build plate
The ZYYX 3D Printer comes pre leveled from the factory and will use the auto leveling function to adjust itself before every print.
If your factory leveling has been altered the printer might display “Your build plate needs calibration. Please run the leveling script.”
If this happens or you are concerned that the factory leveling has been altered by mistake you can run an assisted factory leveling wizard. To do this you choose UTILITIES->Level Build Plate in the menu system of the printer.
You will then be guided through leveling, and asked to turn the leveling knobs under the build plate holder.
NOTE, the words ‘clockwise’ and ‘counter-clockwise’ in the wizard should be interpreted as the direction of turning when looking at the build plate from above.